Expert Answers about Keystone Bullet Ultra Lite Travel Trailer

• MORryde Shock Absorbing Equalizer For a 2018 Keystone Bullet 277BHSWE
• The MORryde 14-3/4" Shock Absorbing Equalizers # MR34AR will allow you to upgrade your factory equalizers. These are specifically designed to fit with the 42" axle center spread you have on your Bullet. I recommend also changing out for the Wet Bolt Kit # MR46ZR which will allow the suspension to more easily move throughout its range. I was able to find your 2018 Keystone Bullet 277BHSWE has 3,500lb axle but I could not get an exact part number for the replacement leaf springs. I have...
  view full answer...


• Replacement Slide-Out Seals For A 2013 Keystone Bullet 246 RBS Travel Trailer
• To get right seal you'll need to remove a portion of the seal to get the side profile of your current seal. There are multiple types of applications for slide-out seals; Glue On, Peel-N-Stick, Press In, Push On, and Slide-On. There are multiple styles and measurements the seals; some come with a bulb, some don't. For example the Rubber Wiper Seal with Bulb for RV Slide Out - 3/16" Flange - 40' Long x 2-7/8" Tall # SR38FR you were looking at will come with the bulb and is a press on design...
  view full answer...


• Replacement Awning Arms for 2017 Keystone Bullet
• Sorry to hear about your awning mishap but we can help you with a set of new awning arms you can use with your existing setup on your 2017 Keystone Bullet. Please refer to the linked page that displays replacement awning arms. We have kits for flat, pitched and short awnings from Carefree, Dometic and Solera and these come in both black and white. You can check your awning for the manufacturer name (since trailer makers can change their awning source) and a part number, and also measure...
  view full answer...


• How To Find Correct Replacement Tail Light for Keystone Bullet Trailer
• The only way part numbers can be used to find the correct replacement tail lights for a trailer is when you pull them from the base of the light and not the lens. That said, this is typically not how we recommend finding the correct replacements anyhow, we recommend simply measuring the light and noting its shape. You may have to drill a few new holes for mounting but that's pretty standard procedure. Just fill the old holes with silicon and there will be no harm done. They will likely...
  view full answer...


• Replacement Refrigerator Vent for 2015 Keystone Bullet Travel Trailer
• The only fridge vent that we carry is from Camco, is designed for a 24" long x 5-1/4" wide opening, and comes in black or white. If your vent opening matches the opening spec then you can definitely use either of these as a replacement: Black Vent - # CAM42164 Cover - # CAM42163 White Vent - # CAM42161 Cover - # CAM42160 Attached are some videos for you to check out.
  view full answer...